Award PM580/1s 작동 및 설치 지침 - 페이지 10

{카테고리_이름} Award PM580/1s에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Award PM580/1s 12 페이지.

USAGE

The appliance is operated by using knob control and the heat stored is

confirmed by residual heat indicator lamp on the vitroceramic surface.

After reapplying the supply voltage to the hob control after an interruption of

the supply voltage occurred, causes that the residual heat display flashes,

if the corresponding heater had a residual heat of greater + 60 ° C before

the power interruption occurred. The display will flash until the max. residual

heat time has expired or the heater will be selected and activated.

Knob controlled cooker is designed for

operating at 6 heat levels:

Keeping warm position

2-3

Heating position at low heat

4-5-6 Cooking – roasting and boiling

position

Residual Heat Functions

After all cooking processes there is some

heat stored in the vitroceramic glass

called residual heat. The control can

calculate roughly how hot the glass is

in the worst case. If the calculated

temperature is higher than + 60 ° C,

then this will be indicated in the related

residual heat indicator lamp. The residual

heat display is shown as long as the

calculated heater temperature is > + 60

° C.