Miele CS 1028 Instructions d'utilisation et d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele CS 1028. Miele CS 1028 44 pages. Combiset
Également pour Miele CS 1028 : Instructions d'utilisation et d'installation (44 pages), Instructions d'utilisation et d'installation (44 pages), Instructions de conversion (40 pages), Instructions d'utilisation et d'installation (44 pages)

Burner

Do not clean any parts of the burner

in a dishwasher.

The burner can be dismantled and

cleaned when cool.

^ Remove the burner parts and wash

them in a solution of warm water and

liquid dish soap. Dry them

thoroughly. Make sure that the flame

holes are clean and completely dry.

^ Wipe the burner base clean with a

damp cloth and then dry.

Gently wipe the ignitor and ignition

safety control with a slightly damp

cloth, and then wipe dry.

Do not let the ignitor get wet. If it

gets wet it will not spark.

^ After cleaning dry all surfaces with a

clean cloth.

Cleaning and care

Reassembling the burner

^ Place cover plate c over burner

base d so that the ignitor and the

ignition safety control extend through

their respective holes in the cover

plate. The cover plate must sit evenly

over the burner base.

Do not use a warped cover plate.

^ Place the burner base in position

above the cover plate making sure

that pins e slot into their respective

holes in the burner head b.

^ Place burner cap a in position.

Be careful not to mix up the parts.