Miele CS 1028 Bedienings- en installatie-instructies - Pagina 17

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele CS 1028. Miele CS 1028 44 pagina's. Combiset
Ook voor Miele CS 1028: Bedienings- en installatie-instructies (44 pagina's), Bedienings- en installatie-instructies (44 pagina's), Instructies omzetten (40 pagina's), Bedienings- en installatie-instructies (44 pagina's)

Burner

Do not clean any parts of the burner

in a dishwasher.

The burner can be dismantled and

cleaned when cool.

^ Remove the burner parts and wash

them in a solution of warm water and

liquid dish soap. Dry them

thoroughly. Make sure that the flame

holes are clean and completely dry.

^ Wipe the burner base clean with a

damp cloth and then dry.

Gently wipe the ignitor and ignition

safety control with a slightly damp

cloth, and then wipe dry.

Do not let the ignitor get wet. If it

gets wet it will not spark.

^ After cleaning dry all surfaces with a

clean cloth.

Cleaning and care

Reassembling the burner

^ Place cover plate c over burner

base d so that the ignitor and the

ignition safety control extend through

their respective holes in the cover

plate. The cover plate must sit evenly

over the burner base.

Do not use a warped cover plate.

^ Place the burner base in position

above the cover plate making sure

that pins e slot into their respective

holes in the burner head b.

^ Place burner cap a in position.

Be careful not to mix up the parts.