Allmatic BAXS900 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Allmatic BAXS900. Allmatic BAXS900 13 pages. For rolling shutters

EXAMPLE OF CONNECTION MOLEX R.CO.O (RADIO SYSTEM T.CO.O - R.CO.O)

WARNING! When using R.CO.O with plug-in connector, set the jumpers at 8k2, the power supply jumper at

24V and DIP1 ON. It is necessary to learn the transmitter (T.CO.O, mobile part) to the receiver. To learn the

transmitter, briefly press the red "Prog/Reset" button on R.CO.O and then transmit with the T.CO.O button (Fig.7).

Fig. 7

EXAMPLE OF SPECIAL CONFIGURATION

CONNECTING THREE BAXS900 FOR SYNCHRONISED CONTROL VIA A SINGLE KEY SELECTOR

BAXS900 1

KEY SWITCH

WARNING! In the terminal block (see detail fig. 2) terminals 1-2 and 6 (COM) there are two clean contacts N.A.

(NORMALLY OPEN AND CLOSED INPUTS), from which it is possible to control the activation of other devices.

4 / 12

CONNECTOR

BAXS900 2

RESISTOR

8k2

1/4W

BAXS900 3

EDGE

CONTACT

N.C.

Fig. 8

6-1622623 rev. 3