360 Yield 360 Y-DROP HAGIE STS 100 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 360 Yield 360 Y-DROP HAGIE STS 100. 360 Yield 360 Y-DROP HAGIE STS 100 11 pages. Steel booms

Imprimer la page

ESTABLISH

DROP LOCATIONS

Figures 1 and 2

Step 1

Locate the center of the machine and

identify the location of all the drops. On

the sprayer boom, mark where each riser

mount will be located. This will ensure

that the extension tubes will not interfere

with the riser mounts.

Figure 3

Step 2

From the center, measure out 51" (±5") on

either side, as shown in Figure 3.

NOTE: The center mounting position will

have to be offset in order to eliminate

conflict with the center riser mount.

Step 3

For the primary boom; starting at the

wing fold pivot pin, measure out and

make marks at 50", 104", 168", 223" and

272" (all measurements are ±5"). Repeat

for the other primary boom.

INSTRUCTIONS 360 Y-DROP

HAGIE STS 80', 90' & 100' STEEL BOOMS

Figure 1

Figure 2

Figure 3

360YIELDCENTER.COM