360 Yield 360 Y-DROP JOHN DEERE 4730 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 360 Yield 360 Y-DROP JOHN DEERE 4730. 360 Yield 360 Y-DROP JOHN DEERE 4730 11 pages.

Imprimer la page

INSTALL NEW SQUARE TUBE

III.

BRACKET ON OEM PRIMARY BOOM

Figures 6 and 7

To prepare for the steps that follow, you will need

to drill a 7/16" hole 84" +/-6" from the pivot pin on

the OEM Primary boom (1). This will allow for the

installation of the second mounting position of the

U-bolt on the rear OEM boom.

Figure 8

Step 1

With the threads pointing down, install

U-bolt (1) on front OEM boom. Install

bracket assembly (2) and the nuts onto

the front OEM boom.

Bag AA

Step 2

With the threads pointing down, install

U-bolt (3) over the rear OEM boom. Install

bracket assembly (4) and nuts onto the rear

OEM boom.

Bag EE

Step 3

Install extension tube (5) into bracket

assemblies (2) and (4).

Step 4

Install 360 Y-DROP boom bracket (6) onto

extension tube (5).

Bag BB

Step 5

Install set screw (7).

Hardware Kit A within Bag BB

Figure 9

Step 6

Install set screws (8).

P/N 207042 Hardware Kit D

within OEM Boom Bracket Kit

Step 7

Install stop bolt assemblies (9) at the

front and rear of the extension tube.

Hardware Kit B within Bag BB

Repeat Steps 1-7 for the remaining sprayer

mount packages.

INSTRUCTIONS 360 Y-DROP

Figure 6

Figure 7

Figure 8

Figure 9

360YIELDCENTER.COM

JOHN DEERE 4730/4830

7/16"