Miele DAW 1620 Active Instructions d'utilisation et d'installation - Page 22
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DAW 1620 Active. Miele DAW 1620 Active 36 pages.
Imprimer la page
Installation
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
Protective foil
The housing components have protect-
ive foil around them to protect them
from transport damage.
Please remove this foil before fitting
the housing components. It can be
peeled off easily.
Installation materials
1 vent connection
for exhaust ducting 150 mm.
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for recircu-
lation mode).
2 wall brackets
for securing the cooker hood to the
wall
22
8 screws, 5 x 60 mm and
8 plugs, 8 x 50 mm
for securing to the wall
The screws and plugs are de-
signed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the cooker hood.
2 screws, 3.9 x 7.5 mm
for securing the chimney
Installation plan
See the installation plan for details on
the individual steps involved in the in-
stallation of this appliance.