Miele DAW 1620 Active Instrukcja obsługi i instalacji - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DAW 1620 Active. Miele DAW 1620 Active 36 stron.

Installation



Before installation, it is important

to read the information given on the

following pages as well as the

"Warning and Safety instructions" at

the beginning of this booklet.

The housing components have protect-

ive foil around them to protect them

from transport damage.

 Please remove this foil before fitting

the housing components. It can be

peeled off easily.

1 vent connection

for exhaust ducting  150 mm.

1 non-return flap

for fitting into the exhaust socket on

the motor unit (not needed for recircu-

lation mode).

2 wall brackets

for securing the cooker hood to the

wall

8 screws, 5 x 60 mm and

8 plugs, 8 x 50 mm

for securing to the wall



The screws and plugs are de-

signed for use in solid walls only.

For other types of wall construction,

alternative fixings will be required.

Make sure the wall is able to take the

weight of the cooker hood.

2 screws, 3.9 x 7.5 mm

for securing the chimney

Installation plan

See the installation plan for details on

the individual steps involved in the in-

stallation of this appliance.