HP 234664-002 - ProLiant - ML330T02 Manuel d'introduction - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'introduction pour {nom_de_la_catégorie} HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 22 pages. Visualization and acceleration in hp proliant servers
Également pour HP 234664-002 - ProLiant - ML330T02 : Questions fréquemment posées (4 pages), Manuel de mise en œuvre (35 pages), Livre blanc technique (12 pages), Mise à jour du micrologiciel (9 pages), Vue d'ensemble (20 pages), Manuel de mise en œuvre (26 pages), Manuel de dépannage (18 pages), Manuel de mise en œuvre (11 pages), Manuel d'installation (2 pages), Manuel de configuration (2 pages), Manuel d'introduction (19 pages), Manuel de mise à jour (9 pages), Manuel de mise à jour (16 pages), Manuel d'introduction (10 pages), Manuel d'instructions d'installation (15 pages), Dossier technologique (9 pages)

Imprimer la page
HP 234664-002 - ProLiant - ML330T02 Manuel d'introduction
The 64-bit Xeon 5100 series two-core processor runs at a maximum frequency of 3.0 GHz with 4 MB
of shared L2 cache and a maximum front-side bus speed of 1333 megahertz (Figure 7 right).
The Xeon 5000 Sequence as well as the 5100 and 5200 series processors use the Intel 5000 series
chipsets. These chipsets contain two main components: the Memory Controller Hub (MCH) and the
I/O controller hub. The new Northbridge MCH supports DDR2 Fully-Buffered DIMMs (dual in-line
memory modules).
Figure 7. Diagram representing the major components of two-core Intel Xeon 3000, 5000, 5100, and 5200
Sequence
processors

Xeon four-core processors

The four-core Intel Xeon 5300 series processor (Clovertown) was the first four-core processor for dual-
socket platforms (Figure 8). The Xeon 5300 series processor has two dual-cores. Each pair of cores
shares a L2 cache; up to 4 MB of L2 cache can be allocated to one core. The processor runs at a
maximum frequency of 3.0 GHz, with 2 MB of L2 cache per core. This configuration delivers a
significant increase in processing capacity utilizing the Intel 5000 series chipsets. ProLiant 300 series
servers use the Intel 5000P and 5000Z chipsets. These chipsets support 1066-MHz and 1333-MHz
Two Independent Buses, DDR2 FB-DIMMs, and PCI Express I/O slots.
The four-core Xeon 5400 series processor (Harpertown) has two dual-cores, and each pair shares a
6-MB L2 cache. The Xeon 5400 series processor runs at a maximum frequency of 3.0 MHz with a
1333 MZ or 1600 MHz FSB.
Figure 8. Intel Xeon 5300 and 5400 series processors contain two dual-core chips.
13