HP 234664-002 - ProLiant - ML330T02 Manuel d'introduction - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'introduction pour {nom_de_la_catégorie} HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 22 pages. Visualization and acceleration in hp proliant servers
Également pour HP 234664-002 - ProLiant - ML330T02 : Questions fréquemment posées (4 pages), Manuel de mise en œuvre (35 pages), Livre blanc technique (12 pages), Mise à jour du micrologiciel (9 pages), Vue d'ensemble (20 pages), Manuel de mise en œuvre (26 pages), Manuel de dépannage (18 pages), Manuel de mise en œuvre (11 pages), Manuel d'installation (2 pages), Manuel de configuration (2 pages), Manuel d'introduction (19 pages), Manuel de mise à jour (9 pages), Manuel de mise à jour (16 pages), Manuel d'introduction (10 pages), Manuel d'instructions d'installation (15 pages), Dossier technologique (9 pages)

HP 234664-002 - ProLiant - ML330T02 Manuel d'introduction
The four-core Intel Xeon 7300 series processor (Tigerton) consists of two dual-core silicon chips on a
single ceramic module, similar to the Xeon 5300 series processors. Each pair of cores shares a L2
cache; up to 4 MB of L2 cache can be allocated to one core. Intel states the Xeon 7300 series
processors offer more than twice the performance and more than three times the performance-per-watt
of the previous generation 7100 series, which is based on the NetBurst microarchitecture. Xeon 7300
series processors are empowered by the Intel® 7300 Chipset, which features Dedicated High-Speed
Interconnects (DHSI). DHSI is an independent point-to-point interface between the chipset and each
processor that provides full front side bus bandwidth to each processor (Figure 9). The point-to-point
interface significantly reduces data traffic and provides lower latencies and greater available
bandwidth. The chipset also features a 64-MB snoop filter that manages data coherency across
processors, eliminating unnecessary snoops and boosting available bandwidth.
Figure 9. Intel Xeon 7300 series processors with the Intel 7300 Chipset and Dedicated High-Speed Interconnects
Based on the 45nm Penryn core, the 6-core Dunnington processor is the successor to Tigerton and has
a 16MB L3 "last level cache."
Enhanced SpeedStep® Technology
Four-core Intel Xeon 5300 and 7300 series processors support Enhanced Intel SpeedStep
Technology. These processors have power state hardware registers that are available (exposed) to
allow IT organizations to control the processor's performance and power consumption. These
capabilities are implemented through Intel's Enhanced Intel SpeedStep Technology and demand-
based switching. With the appropriate ROM firmware or operating system interface, programmers
can use the exposed hardware registers to switch a processor between different performance states,
or P-states
3
, at different power consumption levels. For example, HP developed a power management
feature called HP Power Regulator that uses P-state registers to control processor power use and
performance. These capabilities have become increasingly important for power and cooling
management in high-density data centers. With the combination of this technology and data-center
management tools such as Insight Power Manager, IT organizations have more control over the
power consumption of all the servers in the data center.
3
The ACPI body defines P-states as processor performance states. For Intel and AMD processors, a P-state is
defined by a fixed operating frequency and voltage.
14