HP 3000 Series Manuel - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} HP 3000 Series. HP 3000 Series 25 pages. 9x9 to k class conversion
Également pour HP 3000 Series : Manuel de mise à jour (19 pages), Manuel (20 pages), Manuel d'installation (42 pages)

Imprimer la page

• Verifying that SNA Link is properly installed

and configured prior to this installation of

SNA DHCF/iX unless SNA Link will be

installed at the same time.

• Updating the HP 3000 system to the proper

release level and installing the SNA

DHCF/iX software using AUTOINST. Refer

to the HP 3000 MPE/iX Installation and

Update Manual (36123-90001).

• Verifying that all of the necessary software

modules have been successfully installed by

AUTOINST and are at the correct version

levels using the NMMAINT.PUB.SYS utility.

• Performing full system backups as neces-

sary and ensuring that the HP 3000 system

and personnel with HP 3000 system man-

agement knowledge are available when HP

is onsite to complete the minimum configu-

ration of SNA DHCF/iX.

The customer is also responsible for

completing the configuration in order to fully

integrate SNA DHCF/iX into the existing

customer network after HP has completed the

minimum configuration of SNA DHCF/iX.

HP Responsibility

Following the installation of SNA DHCF/iX,

HP is responsible for the following:

• Confirming that all of the necessary soft-

ware modules have been installed and are at

the correct version level.

• Configuring the SNA DHCF/iX product to a

minimum configuration (1 LU) in order to

verify software and hardware functionality.

• Verifying the SNA DHCF/iX configuration by

issuing the DHCFCONTROL START com-

mand and ensuring that the LU to SSCP

session becomes active for the LU that was

configured.

These steps complete HP's portion of the

installation and minimum configuration of

SNA DHCF/iX.

Additional Implementation

Assistance

For implementation needs that go beyond

installation, the customer can either provide

self-support or can purchase additional

services from HP. These services include

Network Startup and HP ConsultLine. In

addition, the customer can also purchase

service from HP on a time-and-materials basis.

Network Startup includes implementation

scheduling and coordination assistance,

network configuration and verification testing,

and network documentation.

Ordering Information

Product/Option

Number

Description

A5563A

SNA Link Interface Card

010

RS-232-C Synchronous

Modem Connection

020

V35 Synchronous

Modem Connection

025

Autodial Connection

0D1

Factory Integration

Required for SNA/SDLC, SNA/Services bundle, NS

Point-to-Point, RJE, BSC/iX Softwares (option 001

CIB/CIO become obsolete)

Product/Option

Number

Description

30292B

SNA Services License,

Software and Documentation

310

Tier 1 License (also applies to 315,

320 Tier 2, 3 systems)

330

Tier 4 License (also applies to 335

Tier 5 systems)

340

Tier 6 License (also applies to 350

Tier 7 systems)

0CD

Upgrade credit Tier 1

0CF

Upgrade credit Tier 4

Requires A5563A.

Includes former 30202A, 30293A, 30294A, and 36935A.

Customers must also order the MPE media

product (51543B) on MPE/iX 5.5 Express 7 or

later, or MPE/iX 6.0 Express 1 or later. This is

required to receive software for this product.

HP 3000

Bus ness

Servers