HP 8100 - Elite Convertible Minitower PC Manuel d'installation et de configuration - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de configuration pour {nom_de_la_catégorie} HP 8100 - Elite Convertible Minitower PC. HP 8100 - Elite Convertible Minitower PC 48 pages. Hp compaq convertible minitower business pc
Également pour HP 8100 - Elite Convertible Minitower PC : Spécifications (2 pages), Manuel d'installation rapide et de démarrage (21 pages), Support List (34 pages), Manuel de configuration du logiciel (9 pages), Carte illustrée des pièces et services (4 pages)

Enter the default password.

The default password is "admin". Passwords are case sensitive.

The user must change the default password before any changes can be made

in the MEBx.

Change the password for the MEBx.

The new password must meet the criteria defined in the Password Guideline

Section, also known as a strong password. It must be entered twice for

verification.

Changing the password indicates that AMT ownership has been established.

The system will go from Factory phase to In-Setup phase. The ME and AMT

options within the MEBx are accessible and the system can be accessed via the

AMT WebGUI.

Go into the Intel ME Platform Configuration.

Figure 2: Intel ME Platform Configuration Screen

Check the Intel ME State Control.

Default Setting

Recommended Setting

Select Enabled.

This option enables or disables the ME. If set to Disable, the ME is still

initialized during POST and executes any chipset required function(s), but is

halted soon afterwards so that it does not generate any network traffic. It is

used for diagnostic purposes. If there is a problem where the ME is affected, it

: Enabled