- ページ 6

デスクトップ HP 8100 - Elite Convertible Minitower PCのPDF 設定・構成マニュアルをオンラインで閲覧またはダウンロードできます。HP 8100 - Elite Convertible Minitower PC 48 ページ。 Hp compaq convertible minitower business pc
HP 8100 - Elite Convertible Minitower PC にも：仕様 (2 ページ), クイックセットアップとスタートマニュアル (21 ページ), サポート一覧 (34 ページ), ソフトウェア設定マニュアル (9 ページ), 図解パーツ＆サービスマップ (4 ページ)

Enter the default password.

The default password is "admin". Passwords are case sensitive.

The user must change the default password before any changes can be made

in the MEBx.

Change the password for the MEBx.

The new password must meet the criteria defined in the Password Guideline

Section, also known as a strong password. It must be entered twice for

verification.

Changing the password indicates that AMT ownership has been established.

The system will go from Factory phase to In-Setup phase. The ME and AMT

options within the MEBx are accessible and the system can be accessed via the

AMT WebGUI.

Go into the Intel ME Platform Configuration.

Figure 2: Intel ME Platform Configuration Screen

Check the Intel ME State Control.

Default Setting

Recommended Setting

Select Enabled.

This option enables or disables the ME. If set to Disable, the ME is still

initialized during POST and executes any chipset required function(s), but is

halted soon afterwards so that it does not generate any network traffic. It is

used for diagnostic purposes. If there is a problem where the ME is affected, it

: Enabled