360 YIELD CENTER 360 SOILSCAN Instructions d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} 360 YIELD CENTER 360 SOILSCAN. 360 YIELD CENTER 360 SOILSCAN 12 pages.

Imprimer la page

360 SOILSCAN

STORAGE GUIDELINES

Below are tips for storing your machine for more than 24

hours or over the winter.

Store the NO3-N Sensor (gray) dry. Use the

NO3-N Storage Bottle that came with the

sensor to cover the tip. Switch to this storage

method if the machine will not be used within

the next 24 hours.

Fill the small Reference Electrode Storage Bottle

¾ full with Standard Solution. Add cap to bottle

and insert over electrode (red), making sure

electrode tip is immersed in solution. Tighten

the cap on the bottle. Switch to this storage

method if the machine will not be used within

the next 24 hours.

Place the 360 SOILSCAN™ machine and sensors

in a mild environment (60°F to 80°F). Do not

leave the machine in an unheated shop as

exposure to cold temperatures can affect the

sensor performance. A good rule of thumb is to

treat the machine and sensors similar to how

you would treat your iPad.

Standard Solution can be stored at room

temperature.

Extra tips that have not been opened should

also be stored at room temperature in their

original packaging.

For winter storage, make sure the water tank on

your machine is empty and the water line

is purged.

SETUP INSTRUCTIONS

Figure 6: Reference Electrode (1) (Red): Always store wet in the

Standard Solution. NO3-N Sensor (2) (Gray): Store dry.

360YIELDCENTER.COM

360 SOILSCAN™