360 YIELD CENTER 360 SOILSCAN Instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} 360 YIELD CENTER 360 SOILSCAN. 360 YIELD CENTER 360 SOILSCAN 12 pages.

Imprimer la page

360 SOILSCAN ADDITIONAL PRODUCT

INFORMATION AND INSTRUCTIONS

Machine Measurements: 21L x 12W x 19H

Weight: 17.4 kg

Lifting/carrying: When picking up 360 SOILSCAN™, use the handle on the back of the machine.

Safety: Please read and follow all instructions prior to operating equipment. Safety may be

impaired if equipment is used in a manner not specified by the manufacturer.

Wear chemical splash safety goggles, chemical-resistant gloves, and a chemical-resistant apron

when handling standard solution.

Noise level: Noise levels emitted from the equipment are under 70dBA.

USB PORT

The USB port is intended only for connection to signal circuits from SELV sources of supply such

as certified information technology equipment (i.e., computer, touch pads, cell phones, etc.).

The supply connector is intended only for connection to the output of the brick power supply

originally provided with the unit or to an accessory outlet of a vehicle through the vehicle supply

cord provided with the unit. These devices provide required protection for the equipment for

CE compliance and cannot be substituted by other, similar devices. If the supply cord or power

supply is damaged, contact the manufacturer for replacement.

MAINTENANCE/SERVICE

Sensor Tip Test: See attached "360 SOILSCAN Sensor Testing".

Proper Storage: See attached "Storage Guidelines for 360 SOILSCAN".

Power supply: Only use 360 Yield Center supplied parts for power supply. Use of unapproved

parts may result in damage to the components.

Only use 360 Yield Center parts for servicing unit. Use of unapproved parts may result in

damage to components. Regularly inspect all cords and cables. Do not use if any cable or cord is

damaged. Replace any damaged cables and cords with only manufactured specified parts.

Only operate the unit in a location where ready access to the supply connection point for

disconnection is readily accessible.

Replace fuse only as marked on fuseholder. Use only Type ABC fast acting fuses rated 5A,

125Vdc. Use of higher value fuses may result in fire hazards.

End of life disposal of equipment: Do not place in garbage bin. Take equipment to your nearest

electronics recycler for proper disposal.

360 SOILSCAN™

SETUP INSTRUCTIONS

360YIELDCENTER.COM