Burk Plus-X Dual IP-8 Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Burk Plus-X Dual IP-8. Burk Plus-X Dual IP-8 11 pages.

Imprimer la page

Front Panel Indicators

Indicator
Power LED
Power LED
Power LED
Power LED
Link LED
Link LED
Link LED
Link LED

Hardware Configuration

The Plus-X Dual IP-8 Adapter is configured via its onboard web interface. Open a web browser and
navigate to 192.168.0.100. The web page will prompt you for a username and password. Enter the
username admin and password password.
Note: The default IP address is 192.168.0.100 and the default password is "password". If either of these
values have been changed and you do not know what they are, you need to perform a master initialization.
Press and hold the MASTER INIT button on the rear panel for three seconds. This will reset the Plus-X Dual
IP-8 Adapter to its factory default settings.
Settings
Click the Settings link on web page header to access the Plus-X Dual IP-8 Adapter settings. Fill out the
following fields:
IP Address
Subnet Mask
Gateway
ARC Plus IP Address
You may optionally change the HTTP and Plus-X ports of the Plus-X Dual IP-8 Adapter. The default
settings are recommended.
Plus-X Dual IP-8 Adapter Installation and Operation Manual Rev. B
Front panel of the Plus-X Dual IP-8 Adapter
State
Description
Off
Power is off
Green
Power is on
Amber
No firmware loaded (contact Customer
Support)
Flashing
Resetting to factory default settings
Green
Green
Connected to ARC Plus
Off
No connection to ARC Plus
Flashing
Maintenance Mode
Green, Red
Flashing Red
No connection to ARC Plus, unit is in
maintenance mode
3