Miele KM 412 Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Miele KM 412. Miele KM 412 20 pages. Ceramic hobs; ceramic contact grill; open grill; deep fat fryer
Également pour Miele KM 412 : Manuel d'utilisation (24 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (24 pages), Manuel d'instructions d'installation (20 pages)
Imprimer la page
Building in
Fit wall units and the cooker hood
before fitting the ceramic hob, to
avoid damaging the hob.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C heat
resistant adhesive which will not
dissolve or distort. Any backmoulds
must be of heat-resistant material.
~
Ideally the hobs should be installed
with plenty of space on either side.
There may by a wall at the rear and a
wall or tall unit at one side. On the other
side, however, no unit or divider may
stand higher than the hob (see
illustrations).
~
An electric fryer must not be
installed next to a gas hob, as the gas
flames could ignite the fat in the fryer. It
is essential to maintain a safety
distance of at least 288 mm between
these two appliances.
Due to the heat radiated by the hob
and to allow cooking fumes to
dissipate it is essential that a
minimum safety distance a is
maintained between the worktop
cut-out and adjacent kitchen units,
e.g. a tall unit, as follows:
40 mm = KM 400, 400-3, 402,
403, 412, 418, 418-1
50 mm = 408-1, 408-2
250 mm = KM 410, 411, 411-3
There must be a minimum safety
distance of 50 mm between the hob
and a back wall.
Warning and Safety instructions
recommended
not recommended
not allowed!
3