Miele KM 412 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Варочная панель Miele KM 412. Miele KM 412 20 страниц. Ceramic hobs; ceramic contact grill; open grill; deep fat fryer
Также для Miele KM 412: Руководство по эксплуатации (24 страниц), Руководство по эксплуатации (28 страниц), Руководство по эксплуатации (24 страниц), Руководство по установке (20 страниц)

Fit wall units and the cooker hood

before fitting the ceramic hob, to

avoid damaging the hob.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C heat

resistant adhesive which will not

dissolve or distort. Any backmoulds

must be of heat-resistant material.

Ideally the hobs should be installed

with plenty of space on either side.

There may by a wall at the rear and a

wall or tall unit at one side. On the other

side, however, no unit or divider may

stand higher than the hob (see

illustrations).

An electric fryer must not be

installed next to a gas hob, as the gas

flames could ignite the fat in the fryer. It

is essential to maintain a safety

distance of at least 288 mm between

these two appliances.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate it is essential that a

minimum safety distance a is

maintained between the worktop

cut-out and adjacent kitchen units,

e.g. a tall unit, as follows:

40 mm = KM 400, 400-3, 402,

403, 412, 418, 418-1

50 mm = 408-1, 408-2

250 mm = KM 410, 411, 411-3

There must be a minimum safety

distance of 50 mm between the hob

and a back wall.

Warning and Safety instructions

recommended

not recommended

not allowed!