ALLNIC AUDIO A-5000 DHT Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} ALLNIC AUDIO A-5000 DHT. ALLNIC AUDIO A-5000 DHT 13 pages. 300b single-ended pure direct heated triode monoblock power amplifier
Également pour ALLNIC AUDIO A-5000 DHT : Manuel du propriétaire (9 pages)
Imprimer la page
CLEANING
A.
Chassis and glass
Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the
faceplate, chassis and tube chimneys of the A-5000 DHT.
B.
Connectors
You may use any good quality contact cleaner recommended for such applications to clean the contacts
from time to time, as you deem appropriate.
INITIAL SET-UP
A.
LOCATION, LOCATION, LOCATION
Like all audio products using tubes, the Allnic Audio A-5000 DHTs need to be placed on a solid stand in a
location that provides good air circulation around, above and below the monoblocks.
• DO NOT cover the tops of the A-5000 DHTs.
• DO NOT place the A-5000 DHTs on carpet or foam.
• DO NOT subject the A-5000 DHTs to knocks and shocks as you move them around. This advice is
meant particularly for those who may want to place the A-5000 DHTs on some kind of after-market
isolation feet or similar devices. Dropping one side of the A-5000 DHT, or the whole of a unit, is not
a good thing to do and may void the warranty.
• DO NOT place the unit near a strong light or heat source.
• DO NOT place anything heavy on the unit.
• DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could
discolour the metal.
• DO place the A-5000 DHTs on a shelf or stand that is stable and not subject to vibration or sudden
shock.
• DO consider using a high-quality power cord, inter-connects and speaker cables. The A-5000 DHTs
are highly sensitive electronic devices designed for neutrality and will output what you put into
them. Allnic's ZL (Zero Loss) Technology power and interconnect cables will work synergistically
with the A-5000 DHTs.
•
DO try to place the A-5000 DHTs away from major sources and potential receivers of RFI and
EMI. Though well shielded, the A-5000 DHTs will function best away from large power
transformers and other sources of such interference and from other equipment that could be
susceptible to such forms/sources of interference.
• When the A-5000 DHTs are moved from a cold to a warm environment, allow sufficient time for
any condensation to evaporate before plugging the A-5000 DHTs into an AC connection.
• Do not attempt any repairs.
6