ALLNIC AUDIO A-5000 DHT 소유자 매뉴얼 - 페이지 6

{카테고리_이름} ALLNIC AUDIO A-5000 DHT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO A-5000 DHT 13 페이지. 300b single-ended pure direct heated triode monoblock power amplifier
ALLNIC AUDIO A-5000 DHT에 대해서도 마찬가지입니다: 소유자 매뉴얼 (9 페이지)

페이지 인쇄

CLEANING

Chassis and glass

Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the

faceplate, chassis and tube chimneys of the A-5000 DHT.

Connectors

You may use any good quality contact cleaner recommended for such applications to clean the contacts

from time to time, as you deem appropriate.

INITIAL SET-UP

LOCATION, LOCATION, LOCATION

Like all audio products using tubes, the Allnic Audio A-5000 DHTs need to be placed on a solid stand in a

location that provides good air circulation around, above and below the monoblocks.

• DO NOT cover the tops of the A-5000 DHTs.

• DO NOT place the A-5000 DHTs on carpet or foam.

• DO NOT subject the A-5000 DHTs to knocks and shocks as you move them around. This advice is

meant particularly for those who may want to place the A-5000 DHTs on some kind of after-market

isolation feet or similar devices. Dropping one side of the A-5000 DHT, or the whole of a unit, is not

a good thing to do and may void the warranty.

• DO NOT place the unit near a strong light or heat source.

• DO NOT place anything heavy on the unit.

• DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could

discolour the metal.

• DO place the A-5000 DHTs on a shelf or stand that is stable and not subject to vibration or sudden

shock.

• DO consider using a high-quality power cord, inter-connects and speaker cables. The A-5000 DHTs

are highly sensitive electronic devices designed for neutrality and will output what you put into

them. Allnic's ZL (Zero Loss) Technology power and interconnect cables will work synergistically

with the A-5000 DHTs.

•

DO try to place the A-5000 DHTs away from major sources and potential receivers of RFI and

EMI. Though well shielded, the A-5000 DHTs will function best away from large power

transformers and other sources of such interference and from other equipment that could be

susceptible to such forms/sources of interference.

• When the A-5000 DHTs are moved from a cold to a warm environment, allow sufficient time for

any condensation to evaporate before plugging the A-5000 DHTs into an AC connection.

• Do not attempt any repairs.