DIAKAT BL-300 Manuel de l'opérateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} DIAKAT BL-300. DIAKAT BL-300 11 pages.

BL BL BL BL- - - - 300

300

Floor grinder

4. Using the machine whilst its running may endanger the safety or persons, property or traffic.

5. Bring in to operation and work with the machine if any of the safety features are dismounted or

damaged. (Tool cover, rubber cover etc.).

6. Leave running or unsecured machine with out safeguarding it against unauthorised use.

7. Using machine whilst oil leakage, gas leakage or any other content leakage occur

8. Apply additional weight to area around main shaft.

9. Cleaning the machine while it is running.

10. Cleaning the machine with high pressure water.

1.4. Liquidating the machine at the end of its useful lifetime

When liquidating or disposing of the machine it is absolutely necessary to adhere to all rules or

legislation pertinent to the country where the machine have been is used.

The manufacturer can not be held responsible for damages to health or environment in cases where all

the above mentioned principles where not adhered to.

1.5. Safety instruction for work with BL-300 Floor Grinder

When working with the machine the following instructions must be complied with:

1. It is prohibited to work with the machine with out the tool cover (including the rubber collar).

2. No person except the operator is permitted within the danger perimeter of the machine.

3. Start the machine always tilted over its rear wheels with the tool a safe distance above the ground –

use quick-lift shank device.

4. Observe all general rules of safe work.

TECHNICAL DATA AND DESCRIPTION OF THE MACHINE

2.1. Description of the machine

The BL-300 DiaKat Floor Grinder is designed for grinding small bumps and slight unevenness of

horizontal floor areas. It find its widest use in grinding and levelling of smaller concrete, anhydride and

screeded floor areas with diamond or Tc tipped grinding tools The BL -300 is primarily intended for a

"dry grinding" with the option of dust removing.

The grinder is powered by 3,2 kW Honda petrol engine. The engine is mounted on a rigid frame and is

connected to the drive spindle by means of a flexible ring coupling. This configuration enables the tool

to cope with floor unevenness and ensures smooth transfer of torque. The undercarriage consist of

height adjustable rear wheels, with which the depth of cut can de adjusted and an adjustable front wheel

with which the depth of cut can be restricted. The front wheel also provides easier transport. The

machine is manipulated by means of adjustable handlebars.

Page 4 / 9