DIAKAT BL-300 Manuel de l'opérateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} DIAKAT BL-300. DIAKAT BL-300 11 pages.
Imprimer la pageBL BL BL BL- - - - 300
300
300
300
Floor grinder
2.4. Description and designation of tools
Mounting and dismounting of tool
!ATTENTION! Always follow the instructions below when mounting or dismounting tool! (Only
then you can set up the machine with tool correctly and safely.) The machine must be always secured
against movement and the motor switched off when changing tool!
Description
TCT cutters carrier 3bars x 4 x 46 / 6 Ø 300 mm
Usage
* reducing of surface to desired depth
* grinding of small bumps
* surface roughening
* tile's holding glue removal
1 - 3 mm
Depth of cut
* asphalt
Material
* concrete
* cemented spawns and screeds
Description
DIAMONDS Ø 300 mm (coarse, medium, fine)
Usage
* grinding of surface to desired roughness
* small unlevelnesses removal
* removal of old paintings
Depth of cut
0,5 - 1,5 mm
* asphalt
Material
* concrete
* cemented spawns and screeds
Description
Grinding disc TC Ø 300 mm
Usage
* grinding of surface to desired roughness
* small unlevelnesses removal
* removal of old paintings, glues
Depth of cut
0,2 - 0,5 mm
Material
* asphalt
* concrete
* cemented spawns and screeds
* epoxy paintings
Description
Grinding disc - sandpaper (emery discs)
Usage
* grinding of surface to desired roughness
* dirty removal
* removal of old paintings
Depth of cut
0,5 - 1,5 mm
* asphalt
Material
* concrete
* cemented spawns and screeds
Description
Polishing disc - Velcro attached polishing blocks
* concrete polishing
Usage
Depth of cut
N/A
* Concrete
Material
Page 6 / 9