Allo RemoteControl NICE HSKIT2GWFR Instructions
Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Allo RemoteControl NICE HSKIT2GWFR. Allo RemoteControl NICE HSKIT2GWFR 3 pages. Alarm system set
Imprimer la pageINSTRUCTIONS
NICE HSKIT2GWFR ALARM SYSTEM SET
Programming the HSCU2 alarm control panel:
01. In the main menu, touch "Alarms"
02. Make sure the alarm system is disarmed. If it is not, ask the user to disarm it.
03. Scroll vertically with the arrows and select "Menu"
04. a) With EN 50131 disabled (first installation): enter the "Installer code" (this must
already have been programmed). b) With EN50131 enabled: Enter the "User code",
scroll through the menu and select "Installer code" and enter the installer code in the
following page.
05. Confirm with "OK".
06. Select the option you desire as indicated below (example: "Tools" > "Remote
controls" ...).
Visit our Website. www.alloremotecontrol.com
Main menu – Devices:
To acquire and program all alarm system devices, select Devices and follow the
instructions in the submenus
Visit our website: www.Alloremotecontrol.com
families: