Allo RemoteControl NICE HSKIT2GWFR 지침
{카테고리_이름} Allo RemoteControl NICE HSKIT2GWFR에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl NICE HSKIT2GWFR 3 페이지. Alarm system set
페이지 인쇄INSTRUCTIONS
NICE HSKIT2GWFR ALARM SYSTEM SET
Programming the HSCU2 alarm control panel:
01. In the main menu, touch "Alarms"
02. Make sure the alarm system is disarmed. If it is not, ask the user to disarm it.
03. Scroll vertically with the arrows and select "Menu"
04. a) With EN 50131 disabled (first installation): enter the "Installer code" (this must
already have been programmed). b) With EN50131 enabled: Enter the "User code",
scroll through the menu and select "Installer code" and enter the installer code in the
following page.
05. Confirm with "OK".
06. Select the option you desire as indicated below (example: "Tools" > "Remote
controls" ...).
Visit our Website. www.alloremotecontrol.com
Main menu – Devices:
To acquire and program all alarm system devices, select Devices and follow the
instructions in the submenus
Visit our website: www.Alloremotecontrol.com
families: