DiamaPro Systems TVX-A Manuel du propriétaire - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DiamaPro Systems TVX-A. DiamaPro Systems TVX-A 12 pages. Industrial vacuum
Imprimer la page
4. MACHINE DATA
4.1 TECHNICAL DATA PLATE
Every DiamaPro Systems® machine carries a registration plate showing
essential details that are necessary when contacting the
supplier/manufacturer for advice, suggestions or information on spare
parts. The following details are included on the plate:
• Manufacturer
• Model
• Supply voltage
• Installed rated power
• CE symbol (built in compliance with Machinery Directive 2006/42/EEC)
4.2 SAFETY DEVICE
The vacuum cleaner has been manufactured in compliance with all legal
standards for the operator's safety.
• All metal components are grounded to eliminate shock or electrostatic
discharge, including the flexible suction hose that is properly grounded.
Also in this regard the choice of a suitable flexible suction hose allows to
eliminate this risk on the hose length that goes from the use area to the
vacuum cleaner.
• The brakes fitted onto the anterior pivoting casters safely fix the machine
in its place of use where there may be a risk of movement due to uneven
floor surfaces or other particular working conditions.
BEFORE USING THE MACHINE CHECK THAT THE
MACHINE HAS NOT SUFFERED ANY SHOCKS OR
DAMAGES DURING THE TRANSPORT THAT CAN
AFFECT THE OPERATION OF THE ABOVE DEVICES
5. PERFORMANCE TOLERANCES
The performance of the machine may vary based upon environmental
factors such as temperature, air pressure, humidity, etc.
6. SAFETY PROVISIONS
• Carefully read the instructions in this manual before starting, using,
servicing or operating the vacuum cleaner
• Check that the vacuum cleaner hasn't been damaged in any way
• Never turn on the machine if it is faulty or if you suspect it is faulty
• Check that the switch isn't worn or damaged
• Do not approach the suction intake of the machine with unfastened or
broken garments that could easily be sucked into the machine
• Check that the filters are present and efficient
• Make sure that the filters are installed correctly and in full working order,
always observing the regulations in force in the workplace
• Do not carry out repairs without the manufacturer's authorization
• Never use gasoline, solvents or other flammable liquids for cleaning; only
proper detergents should be used for cleaning
• Never move the machine by pulling the power cable or flexible hose
• Never direct the opening of the machine or the flexible tube towards
people or animals
• Protect the machine from the rain
• Check that the machine is connected to a power source with the correct
voltage indicated on the registration plate
• Make sure that the power cable has no wear or damage. If replacing
the cable, always replace it with another of the same specifications as
the original one: cables that are not approved or of inferior quality may
overheat and cause serious injury to the user
• Make sure that the machine is connected to an appropriate power source
in full working order (check the presence of a fully functional grounding
socket)
• Repairs must only be carried out by authorized personnel and only when
the machine is turned off and disconnected from the power source
• Never allow unauthorized personnel to use the machine
• Make sure that all safety devices are in full working order before turning
on the machine
• Never cover the vacuum cleaner during use
7. INSTALLATION
7.1 DELIVERY AND HANDLING
All machines are carefully tested and checked by DiamaPro Systems®
before delivery. The machine is transported inside a protective box or
wrapped in a protective film that allows the courier to see the item during
transport and is securely fixed to a pallet. If any part of the machine is not
intact or has been damaged during transport, file an immediate complaint
with the courier. Parts that have been damaged or broken due to incor-
rect transport or handling of the machine will not be recognized by the
manufacturer's warranty. The machine must be lifted and moved using a
forklift truck in accordance with the relevant safety regulations in force in
the workplace
7.2 CHECK THE PROPER ELECTRICAL
CONNECTION
Connect the industrial plug to the power cable and connect the plug to a
socket that has the same amp rating and is protected by a line-isolating
switch.
8. PERIODICAL MAINTENANCE
Maintenance and cleaning operations must ALWAYS be carried out when
the vacuum is turned off and disconnected from the power source. No
particular measures must be taken for the maintenance, cleaning or lubri-
cation of the suction unit. However, it is important to remember that correct
use and servicing are essential if the safety and efficiency of the vacuum
are to be guaranteed.
To ensure regular and constant operation and to prevent the warranty
from becoming void, always use genuine DiamaPro Systems® spare parts
when repairs are needed.
8.1 BEFORE TURNING ON AND TURNING OFF
EVERY DAY
• Visually check that the suction hose has not been damaged in any way (it
must not be damaged, torn, crushed)
• Check that the electrical switches are in full working order and are not
damaged in any way
• Check the level of waste inside the main barrel N.B. Empty the main
barrel if you are using an DiamaPro model empty the main barrel
• Check that the suction hose has not been damaged in any way
• Check that the motor head is correctly positioned on the filter chamber
and that the latter is correctly placed on the main barrel
• If the vacuum cleaner is moved, ensure that the power voltage of the play
in this new location corresponds to the one on the technical data plate
8.2 AT EVERY 50 HOURS OF OPERATION
• Check the condition of the primary filter: it must not have tears, holes or
other damage: in this case replace it (see 14.)
• Check that the technical data plate is legible and not damaged in any
way: contact the manufacturer for a replacement if necessary
9. PRODUCT DISPOSAL
Dispose of the machine and any accessories according to the legislation
of the state/country. To avoid affecting the environment or your health or
the health of others it is recommended to separate the machine from other
waste, and if necessary properly recycle it.