DiamaPro Systems TVX-A Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyedot Debu DiamaPro Systems TVX-A. DiamaPro Systems TVX-A 12 halaman. Industrial vacuum

Halaman Cetak

4. MACHINE DATA

4.1 TECHNICAL DATA PLATE

Every DiamaPro Systems® machine carries a registration plate showing

essential details that are necessary when contacting the

supplier/manufacturer for advice, suggestions or information on spare

parts. The following details are included on the plate:

• Manufacturer

• Model

• Supply voltage

• Installed rated power

• CE symbol (built in compliance with Machinery Directive 2006/42/EEC)

4.2 SAFETY DEVICE

The vacuum cleaner has been manufactured in compliance with all legal

standards for the operator's safety.

• All metal components are grounded to eliminate shock or electrostatic

discharge, including the flexible suction hose that is properly grounded.

Also in this regard the choice of a suitable flexible suction hose allows to

eliminate this risk on the hose length that goes from the use area to the

vacuum cleaner.

• The brakes fitted onto the anterior pivoting casters safely fix the machine

in its place of use where there may be a risk of movement due to uneven

floor surfaces or other particular working conditions.

BEFORE USING THE MACHINE CHECK THAT THE

MACHINE HAS NOT SUFFERED ANY SHOCKS OR

DAMAGES DURING THE TRANSPORT THAT CAN

AFFECT THE OPERATION OF THE ABOVE DEVICES

5. PERFORMANCE TOLERANCES

The performance of the machine may vary based upon environmental

factors such as temperature, air pressure, humidity, etc.

6. SAFETY PROVISIONS

• Carefully read the instructions in this manual before starting, using,

servicing or operating the vacuum cleaner

• Check that the vacuum cleaner hasn't been damaged in any way

• Never turn on the machine if it is faulty or if you suspect it is faulty

• Check that the switch isn't worn or damaged

• Do not approach the suction intake of the machine with unfastened or

broken garments that could easily be sucked into the machine

• Check that the filters are present and efficient

• Make sure that the filters are installed correctly and in full working order,

always observing the regulations in force in the workplace

• Do not carry out repairs without the manufacturer's authorization

• Never use gasoline, solvents or other flammable liquids for cleaning; only

proper detergents should be used for cleaning

• Never move the machine by pulling the power cable or flexible hose

• Never direct the opening of the machine or the flexible tube towards

people or animals

• Protect the machine from the rain

• Check that the machine is connected to a power source with the correct

voltage indicated on the registration plate

• Make sure that the power cable has no wear or damage. If replacing

the cable, always replace it with another of the same specifications as

the original one: cables that are not approved or of inferior quality may

overheat and cause serious injury to the user

• Make sure that the machine is connected to an appropriate power source

in full working order (check the presence of a fully functional grounding

socket)

• Repairs must only be carried out by authorized personnel and only when

the machine is turned off and disconnected from the power source

• Never allow unauthorized personnel to use the machine

• Make sure that all safety devices are in full working order before turning

on the machine

• Never cover the vacuum cleaner during use

7. INSTALLATION

7.1 DELIVERY AND HANDLING

All machines are carefully tested and checked by DiamaPro Systems®

before delivery. The machine is transported inside a protective box or

wrapped in a protective film that allows the courier to see the item during

transport and is securely fixed to a pallet. If any part of the machine is not

intact or has been damaged during transport, file an immediate complaint

with the courier. Parts that have been damaged or broken due to incor-

rect transport or handling of the machine will not be recognized by the

manufacturer's warranty. The machine must be lifted and moved using a

forklift truck in accordance with the relevant safety regulations in force in

the workplace

7.2 CHECK THE PROPER ELECTRICAL

CONNECTION

Connect the industrial plug to the power cable and connect the plug to a

socket that has the same amp rating and is protected by a line-isolating

switch.

8. PERIODICAL MAINTENANCE

Maintenance and cleaning operations must ALWAYS be carried out when

the vacuum is turned off and disconnected from the power source. No

particular measures must be taken for the maintenance, cleaning or lubri-

cation of the suction unit. However, it is important to remember that correct

use and servicing are essential if the safety and efficiency of the vacuum

are to be guaranteed.

To ensure regular and constant operation and to prevent the warranty

from becoming void, always use genuine DiamaPro Systems® spare parts

when repairs are needed.

8.1 BEFORE TURNING ON AND TURNING OFF

EVERY DAY

• Visually check that the suction hose has not been damaged in any way (it

must not be damaged, torn, crushed)

• Check that the electrical switches are in full working order and are not

damaged in any way

• Check the level of waste inside the main barrel N.B. Empty the main

barrel if you are using an DiamaPro model empty the main barrel

• Check that the suction hose has not been damaged in any way

• Check that the motor head is correctly positioned on the filter chamber

and that the latter is correctly placed on the main barrel

• If the vacuum cleaner is moved, ensure that the power voltage of the play

in this new location corresponds to the one on the technical data plate

8.2 AT EVERY 50 HOURS OF OPERATION

• Check the condition of the primary filter: it must not have tears, holes or

other damage: in this case replace it (see 14.)

• Check that the technical data plate is legible and not damaged in any

way: contact the manufacturer for a replacement if necessary

9. PRODUCT DISPOSAL

Dispose of the machine and any accessories according to the legislation

of the state/country. To avoid affecting the environment or your health or

the health of others it is recommended to separate the machine from other

waste, and if necessary properly recycle it.