3B Medical LM4000 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3B Medical LM4000. 3B Medical LM4000 7 pages. Cleans and sanitizes cpap tubing
Également pour 3B Medical LM4000 : Manuel de l'utilisateur (12 pages)
Imprimer la page
Using your Lumin Bullet
1. Charge Lumin Bullet
by plugging in USB cord to bottom of
®
BULLET.
2. The BULLET will glow RED while charging, and GREEN when
fully charged.
3. Remove BULLET and place inside CPAP tubing so there is
enough tubing hanging over to pull the tubing.
4. Place BULLET in shell, you will feel the magnets grab the
BULLET.
5. Close shell and slide clasp until the shell locks, your BULLET is
now activated.
6. Pull the tubing all the way to the right, then back to the left,
ensuring you cover the entire length of tubing twice, this process
should take 30-60 seconds for optimal disinfection.
7. Remove hose from BULLET, it is now ready to use.
8
®
Caring for your Lumin Bullet
Should the shell casing of your 3B
soiled you may wipe down with any moist cloth. Do not immerse
your Lumin Bullet
into water or any cleaning solvents. Place your
®
BULLET on a level counter or tabletop. Do not drop your Lumin
Bullet
®
or damage may occur.
9
Device
®
Lumin Bullet
become
™
®