3B Medical LM4000 User Manual - Page 5

Browse online or download pdf User Manual for Accessories 3B Medical LM4000. 3B Medical LM4000 7 pages. Cleans and sanitizes cpap tubing
Also for 3B Medical LM4000: User Manual (12 pages)

Print Page

Using your Lumin Bullet

1. Charge Lumin Bullet

by plugging in USB cord to bottom of

BULLET.

2. The BULLET will glow RED while charging, and GREEN when

fully charged.

3. Remove BULLET and place inside CPAP tubing so there is

enough tubing hanging over to pull the tubing.

4. Place BULLET in shell, you will feel the magnets grab the

BULLET.

5. Close shell and slide clasp until the shell locks, your BULLET is

now activated.

6. Pull the tubing all the way to the right, then back to the left,

ensuring you cover the entire length of tubing twice, this process

should take 30-60 seconds for optimal disinfection.

7. Remove hose from BULLET, it is now ready to use.

Caring for your Lumin Bullet

Should the shell casing of your 3B

soiled you may wipe down with any moist cloth. Do not immerse

your Lumin Bullet

into water or any cleaning solvents. Place your

BULLET on a level counter or tabletop. Do not drop your Lumin

Bullet

or damage may occur.

Device

Lumin Bullet

become

™