Miller Spectrum 625 X-TREME Manuel du propriétaire - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Miller Spectrum 625 X-TREME. Miller Spectrum 625 X-TREME 44 pages. Air plasma cutter
Également pour Miller Spectrum 625 X-TREME : Manuel du propriétaire (40 pages), Manuel du propriétaire (40 pages)
Imprimer la page
4-5. Connecting Gas/Air Supply
Tools Needed:
9/16 in.
4-6. Connecting Work Clamp
2
.
A complete Parts List is available at www.MillerWelds.com
1
1
.
1
2
3
Obtain hose with 1/4 NPT right-
hand thread fitting. Wrap threads
with teflon tape (optional) or apply
pipe sealant, and install fitting in
opening. Route hose to gas/air
supply.
2
3
From Gas/Air
Supply
1
2
Connect work clamp to a clean,
paint-free location on workpiece, as
close to cutting area as possible.
Use only clean, dry air with 90
to 120 psi (621 to 827 kPa)
pressure.
Gas/Air Inlet Opening
Hose
Teflon Tape
805 326-A
Work Clamp
Workpiece
Ref. 803 640-A
OM-237 974 Page 13