Burkert S030 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Burkert S030. Burkert S030 11 pages. Inline fitting

Imprimer la page

Correct

Fig. 5:

Additional recommendations on installation

English

Installing a Clamp fitting

→

Make sure the seals are in good condition.

→

Place seals adapted to the process (temperature,

fluid type) in the grooves of the Clamp fitting.

→

Fix the Clamp fitting to the pipe by means of a clamp collar.

Installing a flange fitting

→

Make sure the seals are in good condition.

→

Place seals adapted to the process (temperature,

fluid type) in the grooves of each connection.

Make sure the seal remains in the groove while

tightening the flange.

→

Tighten the flange to fix the fitting to the pipe.

English

Installing a fitting with welding

ends

Incorrect

NOTE

The seal on the fitting with welding ends may be

damaged during welding.

→

Incorrect

→

Safety instructions

Risk of injury due to high pressure in the installation.

▶ Stop the circulation of fluid, cut off the pressure

▶ Observe the fluid temperature/pressure dependency

Risk of burn injury due to high fluid temperatures.

▶ Do not touch with bare hands the parts of the product

▶ Stop the circulation of fluid and drain the pipe before

Risk of injury due to the nature of the fluid.

▶ Respect the prevailing regulations on accident preven-

Follow the previously described general installation

recommendations.

Before welding the weld-ends, unscrew the 4 tight-

ening screws.

Remove the sensor holder.

Remove the seal.

Weld the weld-ends.

After welding, correctly replace the seal in the

groove.

Replace the sensor holder.

Tighten the 4 screws in an alternating pattern,

applying a nominal tightening torque of 1,5 N·m

(1,11 lbf·ft).

MAINTENANCE

DANGER

and drain the pipe before loosening the process

connections.

depending on the fitting used.

that are in contact with the fluid.

loosening the process connections.

tion and safety relating to the use of dangerous fluids.

English