Burkert S030 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Burkert S030. Burkert S030 11 pages. Inline fitting

Imprimer la page

WARNING

Risk of injury due to non-conforming maintenance.

▶ Maintenance must only be carried out by qualified and

skilled staff with the appropriate tools.

▶ Ensure that the restart of the installation is controlled

after any interventions.

Cleaning

NOTE

The product may be damaged by the cleaning

solution.

▶ Clean the product with a cloth dampened with water

or a detergent compatible with the materials the pro-

duct is made of.

English

Two versions of the S030 in DN15 and DN20

exist, having different K factors.

Only version 2, identified by the "v2" marking, is

available from March 2012. The "v2" marking can

be found:

• on the bottom of the DN15 or DN20 fitting in

plastic:

• on the side of the DN15 or DN20 fitting in metal:

English

SPARE PARTS AND

ACCESSORIES

CAUTION

Risk of injury and/or damage caused by the use of

unsuitable parts.

Incorrect accessories and unsuitable spare parts may

cause injuries and damage the product and the sur-

rounding area.

▶ Use only original accessories and original spare parts

from Bürkert.

Certificate

Inspection certificate 3.1 acc. to

EN 10204

Test report 2.2 acc. to EN 10204

Certificate with the surface finish

value

3-point calibration certificate (S030

combined with the instrument

mounted)

FDA approval

→

For any certificate, contact your Burkert sales

subsidiary.

Spare parts

Sensor holder in stainless steel

With PVDF paddle-wheel, FKM seal, screws

and certificate, for DN06, DN08, DN15 v2 and

DN20 v2

With PVDF paddle-wheel, FKM seal, screws

and certificate, for DN15 (except DN15 v2 and

DN20 v2) to DN65

With PVDF paddle-wheel, EPDM seal, screws

and certificate, for DN15 (except DN15 v2 and

DN20 v2) to DN65

With PVDF paddle-wheel, EPDM seal, screws

and certificate, internal roughness =0,8 µm for

DN15 (except DN15 v2 and DN20 v2) to DN65

With PP paddle-wheel, EPDM seal, screws

and certificate, for DN06, DN08, DN15 v2 and

DN20 v2

With PP paddle-wheel, EPDM seal, screws

and certificate, for DN15 (except DN15 v2 and

DN20 v2) to DN65.

Sensor holder in brass

With PVDF paddle-wheel, FKM seal, screws

and certificate, for DN06, DN08, DN15 v2 and

DN20 v2

Order code

803723

803722

804175

550676

803724

English

Order code

448 678

432 306

432 305

434 149

554 896

449 425

448 677

English