Miller XR Python 25 Ft. Manuel du propriétaire - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Miller XR Python 25 Ft.. Miller XR Python 25 Ft. 31 pages. 200 ampere push-pull welding gun
Également pour Miller XR Python 25 Ft. : Manuel du propriétaire (24 pages)
Imprimer la page
Section 3
Installation
Technical Specifications
Wire Capacity
Aluminum and Cored Wire ........................... .030" - 1/16" (0.8 mm - 1.6 mm)
Solid and Hard Wire ..................................... .030" - .045" (0.6 mm - 1.2 mm)
Wire Speed (At rated feeder input voltage) .............70 - 875 ipm (22.2 mpm)
Duty Cycle - 100% (All ratings are using Argon gas) ............ 200 Amps Peak
Shipping Weight (approximate) ...................................... 19.29 lbs. (8.29 Kg)
Gun weight (less leads)....................................................... 2.5 lbs. (1.13 Kg)
Support Equipment Required
•
•
•
Gun Lead Connections
Power Cable
A #2 AWG power cable is used on the XR™ Python
the cable has a fitting crimped to the copper cable strands. This fitting is
then threaded into the gun body. The cabinet end of the power cable is
incorporated into the Power Pin connector.
Conduit
The XR™ Python
aluminum wire. The longer fitting with a shallow groove is used on the gun
end. A set screw located on top of the gun handle secures the conduit in
place. The cabinet end of the conduit is incorporated into the Power Pin
connector.
Gas Hose
The gas hose is pushed over a barbed fitting on the gun body and secured
with a plastic tie wrap. The cabinet end of the gas hose is incorporated into
the Power Pin connector.
Electric Cable
A multi-conductor control cable is used on the XR™ Python
of the cable is secured with a cable clamp and the wires are connected to the
potentiometer, the micro switch, the motor and the gun body mechanically.
Slack is left in the electric cable as it exits the back of the gun to prevent
cable and/or wire breakage. The cabinet end of the control cable uses a 10-
Pin, "X" clocked Amphenol connector.
Section 4
Operation
General
The Python
regardless of curved or looped wire conduit. The constant push exerted
by the slave motor in the cabinet, combined with the pull of the gun motor,
C.V. or C.C. power source of sufficient capacity for your needs.
Regulated gas supply and hoses.
Properly sized power leads from power source to wire feeder and ground.
comes standard with a poly-lined conduit, for feeding
®
maintains a constant, steady, uniform wire feed speed,
®
XR™ Python
Owner's Manual - Page 1
®
. The gun end of
®
. The gun end
®