Miller Digital Elite Manuel - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Miller Digital Elite. Miller Digital Elite 28 pages. Auto-darkening helmets
Également pour Miller Digital Elite : Manuel (32 pages)
Imprimer la page
6-3. Replacing The Lens Covers On Digital Elite Standard Helmets
Be sure flat side
of gasket faces
helmet shell.
!
Never use the auto-
darkening lens with-
out the inside and
outside lens covers
properly
Welding spatter will
damage the auto-dark-
ening lens and void the
warranty.
1
Front Lens Gasket
2
Outside Lens Cover
3
Lens Assembly Gasket
4
Lens Assembly
5
Inside Lens Cover
6
Lens Frame
OM-256476 Page 16
Be sure wide edge
of gasket faces
helmet shell.
Remove the lens assembly
to remove either lens cover.
To remove the lens assem-
bly, push down on the helmet
installed.
bottom retaining arms and
push the retaining clips to-
ward the outside of the
helmet. Lift up on the assem-
bly and pull free of the
helmet.
Outside Lens Cover
Remove the outside lens
cover by pushing cover into
the helmet. Remove the rub-
ber lens gasket and install on
the new lens cover. Reinstall
the lens assembly.
2
1
4
3
.
Be sure the flat side of
lens cover gasket faces
the helmet shell.
Inside Lens Cover
To replace the inside lens
cover, remove the lens as-
sembly from the lens frame
by pushing up on the top two
retaining tabs while gently
pushing the lens free.
Remove the lens cover by
sliding it out of either side.
Replace with the new cover
lens and reinstall the assem-
bly in the helmet.
6
5
Ref. 805012