- ページ 18

バイクアクセサリー Miller Digital EliteのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Miller Digital Elite 28 ページ。 Auto-darkening helmets
Miller Digital Elite にも：マニュアル (32 ページ)

ページを印刷する

1. Section 7 − Replacing the Battery

6-3. Replacing The Lens Covers On Digital Elite Standard Helmets

Be sure flat side

of gasket faces

helmet shell.

Never use the auto-

darkening lens with-

out the inside and

outside lens covers

properly

Welding spatter will

damage the auto-dark-

ening lens and void the

warranty.

Front Lens Gasket

Outside Lens Cover

Lens Assembly Gasket

Lens Assembly

Inside Lens Cover

Lens Frame

OM-256476 Page 16

Be sure wide edge

of gasket faces

helmet shell.

Remove the lens assembly

to remove either lens cover.

To remove the lens assem-

bly, push down on the helmet

installed.

bottom retaining arms and

push the retaining clips to-

ward the outside of the

helmet. Lift up on the assem-

bly and pull free of the

helmet.

Outside Lens Cover

Remove the outside lens

cover by pushing cover into

the helmet. Remove the rub-

ber lens gasket and install on

the new lens cover. Reinstall

the lens assembly.

Be sure the flat side of

lens cover gasket faces

the helmet shell.

Inside Lens Cover

To replace the inside lens

cover, remove the lens as-

sembly from the lens frame

by pushing up on the top two

retaining tabs while gently

pushing the lens free.

Remove the lens cover by

sliding it out of either side.

Replace with the new cover

lens and reinstall the assem-

bly in the helmet.

Ref. 805012