Diamond BRET/1G-HR Instructions d'utilisation et d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Diamond BRET/1G-HR. Diamond BRET/1G-HR 3 pages. Gas crepe grill

Imprimer la page

Diamond BRET/1G-HR Instructions d'utilisation et d'installation

Gas connection

These machines work on the following gases : Butane G30, Propane G 31, natural gas

G20/G25, and with all pressures provided by the gas grid. The connection is provided

by 3/8 gas threading.

The machines are supplied with a Butane/propane injector corresponding to the 112E+3+.

The heat output of the machine is

400 FG 3.6 kW

Connect the machine to the gas supply pipe, inserting a closing valve isolating the machine

from the rest of the facility. Check that the settings correspond to the nature and pressure of

the gas supplied to the facility. Check the supply pressure, with all burners on, using a

manometer. It should be equal to the information on the sign plate.

The fresh air flowrate required for the combustion air supply is :

400 FG

General installation conditions

The machine should be installed and maintained in accordance with applicable

regulations and professional rules, including but not limited to :

Safety rules against fire and panic in facilities open to the public.

General instructions

With all machines :

Article GZ Combustible gas and liquid hydrocarbon facilities.

Then according to the practice :

Article CH Heating, ventilation, refrigeration, air conditioning and

sanitary hot water steam production.

Article GC Installation of machines intended for catering uses.

Instructions specific to each type of facility open to the public.

7.2 m3/H

Changing gas

Important : do not drill the injectors

Gas category table, depending on the destination country of the machine :

Destination country