Burley Launde 9304-C Instructions d'installation et manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Burley Launde 9304-C. Burley Launde 9304-C 20 pages. Fireball with catalytic converters
Imprimer la pageWARNING
The Burley Fireball & Firecube series of stoves are primarily for burning wood (this
includes logs and sawdust briquettes). In smoke control areas only wood fuels should be
used.
Before purchasing a stove we would strongly advise you seek the advice of a HETAS
installer to ensure suitability of the product to your home.
Other fuels, such as coal (any type), smokeless fuels or petroleum coke can only be used if
the optional multi-fuel grate is fitted (available on models 9105, 9108, 9305, 9307, 9308
only). Under no circumstances should liquid fuels be added. It is not an incinerator and
rubbish, including painted or tanalised wood and MDF, should not be burnt in this
appliance, doing so is potentially dangerous and will invalidate any guarantees
immediately.
Stove Assembly
Door Handle Adjustment
There is a CAM and LOBE mechanism which allows the handle to be moved up and down or in
and out. If required, adjust the handle so it lines up and engages correctly with the stud in the side
of the stove. Incorrect alignment will put excessive force on the door hinges or will result in a poor
seal between the door and the stove.
compresses. A 5mm Allen key will be required.
Page 10 of 20
The door may require adjustment as the rope seal
To adjust the door, loosen off the
socket screw with the Allen key.
Holding the Allen key, use a spanner
to turn the off centre cam to
position the handle. Hold the
cam in the desired position
whilst tightening the screw
with the Allen key.