Burley Launde 9304-C 설치 지침 및 사용자 설명서 - 페이지 10

{카테고리_이름} Burley Launde 9304-C에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Burley Launde 9304-C 20 페이지. Fireball with catalytic converters

WARNING

The Burley Fireball & Firecube series of stoves are primarily for burning wood (this

includes logs and sawdust briquettes). In smoke control areas only wood fuels should be

used.

Before purchasing a stove we would strongly advise you seek the advice of a HETAS

installer to ensure suitability of the product to your home.

Other fuels, such as coal (any type), smokeless fuels or petroleum coke can only be used if

the optional multi-fuel grate is fitted (available on models 9105, 9108, 9305, 9307, 9308

only). Under no circumstances should liquid fuels be added. It is not an incinerator and

rubbish, including painted or tanalised wood and MDF, should not be burnt in this

appliance, doing so is potentially dangerous and will invalidate any guarantees

immediately.

Stove Assembly

There is a CAM and LOBE mechanism which allows the handle to be moved up and down or in

and out. If required, adjust the handle so it lines up and engages correctly with the stud in the side

of the stove. Incorrect alignment will put excessive force on the door hinges or will result in a poor

seal between the door and the stove.

compresses. A 5mm Allen key will be required.

Page 10 of 20

The door may require adjustment as the rope seal

To adjust the door, loosen off the

socket screw with the Allen key.

Holding the Allen key, use a spanner

to turn the off centre cam to

position the handle. Hold the

cam in the desired position

whilst tightening the screw

with the Allen key.