Burmester Classic Series Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Burmester Classic Series. Burmester Classic Series 12 pages. Integrated amplifier
Également pour Burmester Classic Series : Manuel du propriétaire (16 pages)
Imprimer la page
OPERATING THE AMPLIFIER
AC mains switch
The AC mains switch (7) is located at the rear of the housing. It disconnects the 956 MK 2 from the AC
supply. When it is set to OFF the unit is completely disconnected, the LEDs on the front panel remain dark.
Switching to ON activates the stand - by mode and the left STAND BY- LED (1) on the front panel illuminates.
POWER - button
The POWER - button (2) on the front panel switches the 956 MK 2 into operating mode or back into
stand - by mode. In operating mode STAND BY - LED (1) and POWER LED (3) are illuminated. In
stand - by mode only STAND BY - LED (1) lights up. After switching to operating mode the monitoring
system of the 956 MK 2 takes a few seconds to check all circuits before enabeling the speaker outputs.
HOOK - UP OPTIONS
STEREO operation
To use the 956 MK 2 in STEREO mode make the following connections:
(12)
(10)
(11)
MONO operation
To use the 956 MK 2 in MONO moder make the following connections:
(12)
(10)
(11)
BI - AMPING
To use the 956 MK 2 in BI - AMPING mode make the following connections:
(12)
(10)
(11)
(4)
input right channel
(6)
speaker terminal right channel positive
(5)
speaker terminal right channel negative
input left channel
speaker terminal left channel positive
speaker terminal left channel negative
(4)
MONO - ADAPTER (14), red marking
(6)
speaker terminal positive
(5)
must not be connected
MONO - ADAPTER (14), blue marking
speaker terminal negative
must not be connected
(4)
BI - AMP - ADAPTER (15), red marking
(6)
speaker terminal positive for mid- to high-range drivers
(5)
speaker terminal negative for mid- to high-range drivers
BI - AMP- ADAPTER (15), blue marking
speaker terminal positive for bass driver
speaker terminal negative for bass driver
6