Aquasana AQ-UV-C Series Instructions d'utilisation et d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Aquasana AQ-UV-C Series. Aquasana AQ-UV-C Series 16 pages.

Imprimer la page

AQ-UV-C Controllers

AQ-UV-C

Series

Lamp Countdown Sequence

The system counts down the number of days until a lamp change is required.

AQ-UV

At thirty days remaining, the LED will change to a yellow caution indicator. At seven

days remaining, the system will additionally repeat an audible chirp. Past the zero

day threshold, the LED changes to solid red with a continuous buzzer.

AQ-UV

At any point during this sequence, the audible chirp or alarm can be deferred for

seven days by holding the controller button down for a period of five seconds. The

number of deferrals used will be displayed as below. Once the deferral expires, the

alarm will sound once again. The deferral can be repeated up to three times. PLEASE

NOTE: At any point after lamp expiration, the water may be unsafe for consumption

and should not be consumed without another form of disinfection.

Simplistic in operation, these systems feature a tri-

color LED that indicates system status and a 4-digit

display to indicate lamp life remaining. Pressing

the button will change the display to indicate total

running time. When the UV lamp is on and within its

operating age, the LED will be green. When the UV

lamp is not on or the lamp life has expired, the LED

will be illuminated red and an audible buzzer will be

sounding. To remedy this condition, the UV lamp

must be replaced with a new genuine Aquasana UV

lamp.