Aquasana AQ-UV-C Series Operation & Installation Instructions - Page 12

Browse online or download pdf Operation & Installation Instructions for Water Filtration Systems Aquasana AQ-UV-C Series. Aquasana AQ-UV-C Series 16 pages.

Aquasana AQ-UV-C Series Operation & Installation Instructions

AQ-UV-C Controllers

AQ-UV-C
Series

Lamp Countdown Sequence

The system counts down the number of days until a lamp change is required.
AQ-UV
At thirty days remaining, the LED will change to a yellow caution indicator. At seven
days remaining, the system will additionally repeat an audible chirp. Past the zero
day threshold, the LED changes to solid red with a continuous buzzer.
AQ-UV
At any point during this sequence, the audible chirp or alarm can be deferred for
seven days by holding the controller button down for a period of five seconds. The
number of deferrals used will be displayed as below. Once the deferral expires, the
alarm will sound once again. The deferral can be repeated up to three times. PLEASE
NOTE: At any point after lamp expiration, the water may be unsafe for consumption
and should not be consumed without another form of disinfection.
12
Simplistic in operation, these systems feature a tri-
color LED that indicates system status and a 4-digit
display to indicate lamp life remaining. Pressing
the button will change the display to indicate total
running time. When the UV lamp is on and within its
operating age, the LED will be green. When the UV
lamp is not on or the lamp life has expired, the LED
will be illuminated red and an audible buzzer will be
sounding. To remedy this condition, the UV lamp
must be replaced with a new genuine Aquasana UV
lamp.