Aquasana WELL WATER Rhino EQ-WELL-UV Manuel du propriétaire - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Aquasana WELL WATER Rhino EQ-WELL-UV. Aquasana WELL WATER Rhino EQ-WELL-UV 12 pages. Whole house water filter
Imprimer la page
INSTALLATION STEPS
6
6
Install Shut-off Valve and Ensure Spacing
1. Using a pipe cutter, cut into the main water supply line to install the
shut-off valve.
2. Loosely fit shut-off valve to calculate proper spacing of components.
3. Measure distance for Pre-Filter, Rhino tank, Post-Filter, UV FIlter, and
optional add-ons (Salt-Free Conditioner) and mark pipe accordingly.
If you're installing additional add-ons make sure to read through those
separate installation manuals prior to fully installing your complete system.
NOTE: DO NOT cut more pipe than necessary. You can cut more pipe
later if needed. If you're also installing a Pro-Install Kit or bypass loop,
do so at this time.
Incoming
water supply
Cut Pipes
7
Cut pipe along the marked sections from step
5 and clean ends of pipe. Ensure there are no
burrs, sharp edges or deep scratches.
NOTE: Cut tubing as straight as
possible with a utility knife, or
an appropriate pipe cutter for
copper tubing or PVC.
Ensure proper spacing to fit Pre-Filter, Rhino tank,
Post-Filter, UV Filter, and any optional add-ons
Outgoing
water supply