Diamond DRCS-24 Manuel d'installation et d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Diamond DRCS-24. Diamond DRCS-24 11 pages. Carving station
Imprimer la page
The Carving Station power for the top ceramic heat and
the incandescent lights are controlled by the on/off
toggle switch. The switch must be in the "ON" position
for the unit to function. To control the top heat, set the
infinite switch to the desired heating level.
For models with heat in the base, power is
independently controlled by the on/off rocker switch.
Set base control thermostat to the desired heating level
as indicated on the control plate.
WARNING
Some exterior surfaces on the Carving Station will
get hot. Use caution when touching these areas to
avoid injury.
Base Control
Thermostat
Figure 5. Controls
5
OPERATION
Heat Control Infinite Switch
On/Off Toggle Switch
On/Off Rocker Switch
Form No. GRCSM-0401