Diamond B-E477I Manuel - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Diamond B-E477I. Diamond B-E477I 18 pages.
4.
ROUTINE MAINTENANCE
Daily cleaning of all steel components
Use a standard sprayer to apply the liquid detergent on the whole surface of the cooking
compartment and, using a non-abrasive sponge, clean the entire surface thoroughly by
hand.
When finished, rinse the cooking compartment abundantly with tap water
pressurised and/or direct water
When these operations have been performed successfully, dry the cooking compartment
carefully using a non-abrasive cloth. If necessary, repeat the operations described above
for a new cleaning cycle.
Daily cleaning of all glass components
Wait for the equipment cooling.
Do not use pressure and/or direct water jets.
Put a pyroceramic specific detergent on the concerned surface and carefully clean it by a damp
cloth.
Wipe the cooking area by a not abrasive cloth.
Repeat this operation, if necessary.
Cleaning for prolonged deactivation
When the appliance remains idle for a long time, perform all the described daily cleaning
procedures.
For steel components. When the operations are over, protect the parts more exposed to oxidation
doing as follows.
•
Use lukewarm water with a bit of soap to clean the parts;
•
Rinse the parts thoroughly, without using pressurised and/or direct water jets;
•
Dry the surfaces carefully using non-abrasive material;
•
Pass over all the stainless steel surfaces using a non-abrasive cloth slightly moistened with
Vaseline to create a protective coating.
For glass components, apply with a soft cloth a layer of protective wax specific for the material.
Air out the appliances and rooms regularly.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
jets).
- 12 -
12
(do not use