Panasonic WV-NF284 - i-Pro Network Camera Manuel d'installation - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WV-NF284 - i-Pro Network Camera. Panasonic WV-NF284 - i-Pro Network Camera 36 pages. Ip video cameras
Également pour Panasonic WV-NF284 - i-Pro Network Camera : Spécifications (2 pages), Brochure (2 pages), Référence (2 pages), Référence (2 pages), Tableau de comparaison (6 pages), Spécifications (2 pages), Spécifications (2 pages), Note d'intégration (8 pages)

Imprimer la page

Panasonic WV-NF284 - i-Pro Network Camera Manuel d'installation

Step 1

Start the Panasonic IP setting software.

Step 2

Click the [IP setting] button after selecting

the MAC address/IP address of the camera

to be configured.

Note:

When using a DHCP server, the IP

address assigned to the camera can be

displayed by clicking the [Refresh] but-

ton of the IP setting software.

Step 3

Complete each network setup item and click

the [Apply] button.

Note:

When using a DHCP server, it is possible

to set "DNS" to "AUTO".

Important:

• It may take around 30 seconds to com-

pletely upload the settings of the camera

after clicking the [Apply] button. The set-

tings may be invalidated when the AC 24

V or DC 12 V power supply is cut or

when the LAN cable is disconnected

before completing the upload. In this

case, configure the settings again.

• When using a firewall (including soft-

ware), allow access to all UDP ports.