Panasonic WV-NF284 - i-Pro Network Camera Installatiehandleiding - Pagina 30

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Panasonic WV-NF284 - i-Pro Network Camera. Panasonic WV-NF284 - i-Pro Network Camera 36 pagina's. Ip video cameras
Ook voor Panasonic WV-NF284 - i-Pro Network Camera: Specificaties (2 pagina's), Brochure (2 pagina's), Referentie (2 pagina's), Referentie (2 pagina's), Vergelijkingstabel (6 pagina's), Specificaties (2 pagina's), Specificaties (2 pagina's), Integratie Opmerking (8 pagina's)

Pagina afdrukken

Panasonic WV-NF284 - i-Pro Network Camera Installatiehandleiding

Step 1

Start the Panasonic IP setting software.

Step 2

Click the [IP setting] button after selecting

the MAC address/IP address of the camera

to be configured.

Note:

When using a DHCP server, the IP

address assigned to the camera can be

displayed by clicking the [Refresh] but-

ton of the IP setting software.

Step 3

Complete each network setup item and click

the [Apply] button.

Note:

When using a DHCP server, it is possible

to set "DNS" to "AUTO".

Important:

• It may take around 30 seconds to com-

pletely upload the settings of the camera

after clicking the [Apply] button. The set-

tings may be invalidated when the AC 24

V or DC 12 V power supply is cut or

when the LAN cable is disconnected

before completing the upload. In this

case, configure the settings again.

• When using a firewall (including soft-

ware), allow access to all UDP ports.