Panasonic CT-27G33 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-27G33. Panasonic CT-27G33 18 pages. 27" diagonal stereo monitor-receiver
Également pour Panasonic CT-27G33 : Manuel d'utilisation (36 pages), Manuel d'utilisation (17 pages)

Panasonic CT-27G33 Manuel d'utilisation
INSTALLA
TION
Installation
Television
Location
This unit is intended to be used with an optional stand or entertainment center.
Consult your
dealer for available options.
O
Avoid excessive sunlight or bright lights, including reflections.
[]
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure,
£3
Fluorescent lighting may reduce Remote Control transmitting range.
[]
Avoid magnetic equipment, includingmotors, fans, or external speakers.
Optional
Cable
Connections
Shielded audio and video cables should be used between components. For best results:
[]
Use 75-ohm coaxial shielded cables.
[]
Check type of output and input connectors on your components.
O
Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCHWIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Polarized
plug
Cable / Antenna
For proper reception, either a cable or antenna connection is required•
Cable Connection
Connect the cable supplied by your local cable company•
Note:
A cable converter box may be required for proper reception.
Check
with
your
local
Cable
company
for
compatibility
requirements•
Antenna Connection
Incoming
Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
For proper reception of VHF/UHF channels,
an external antenna is required• For
Incoming
Cable from
Home Antenna
best reception an outdoor antenna is recommended•
Antenna Mode must be set to TV in the SET UP menu.
_
Cable Preset
Cable Mode is preset at the ractory. Antenna
users must change to Antenna Mode in the Set
I Up Menu.
[]