AquaStar Ultimate Ozone U3000 Kit Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AquaStar Ultimate Ozone U3000 Kit. AquaStar Ultimate Ozone U3000 Kit 6 pages. Ozone generation system

Imprimer la page

SECTION 1. Overview

Description

The Ultimate Ozone™ system is like no other ozone

injection system on the market. Our easy to install

design delivers ozone through our unique ozone

compatible FlowStar® skimmer.

Unlike other ozone systems, which rely on return

side venturi type injection systems, the Ultimate

Ozone™ system injects ozone through a diffuser stone

located in the skimmer. The ozonated water is drawn

through the skimmer by the pump. As it moves to-

wards the filtration system it oxidizes contaminates,

often changing the structure of organic materials,

which makes it easier for the contaminants to be

removed from the water by the filtration system.

Ozone systems that rely on return side injection

systems return restructured contaminates back into

the pool which can permanently increase

operating costs and may be ineffective with low

settings on variable speed pumps. Our suction side

self-injection system is the solution.

Crystal clear water is now easy to deliver with the

Ultimate Ozone™ system.

Specifications

Power Requirements:

U1000 110/120 volts, .28 amps

U3000 Kit Contents

Includes:

U1000 - Corona Discharge Pump, 1 unit

OZG4017 - Ozone Diffuser Stone, 1 unit

OZG4016 - Ozone Compatible 1/4'' Tubing, 100 ft

Limited Warranty:

Aquastar Pool Products Inc. offers a one-year limited

warranty on the Ultimate Ozone™. See warranty sec-

tion for details and limitations.

Ultimate Ozone™ Installation and User's Guide

Figure 1.2 Front and Side View

SECTION 2. Installation

Location

Ultimate Ozone™ units are designed for wall

mounting. Mount the unit in a clean, protected area,

either indoors or outdoors (preferably out of direct

sunlight). Locate generator out of reach of sprinklers or

drainage spouts. Allow sufficient access for maintenance,

tubing, and electrical wires. Install the Ultimate Ozone™

at least (not less than) one foot above the overflow water

level of the pool or spa where the ozone skimmer is

located.

Wall Mounting

1. Locate the four mounting holes on the top and

bottom of the back panel, two large holes near the top

on the left and right corners and two smaller holes

located respectively on the bottom. Refer to Figure 1.2

for clarification.

2. Install screws through the mounting holes. Secure the

two bottom screws last. Mounting hardware head must

not be smaller than 0.25 inches (6.3 mm) in diameter

and the threads of the hardware must be smaller than

0.25 inches (6.3 mm) in diameter.

Rev: 030717