AquaStar Ultimate Ozone U3000 Kit Instrukcja instalacji i obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sprzęt oświetleniowy AquaStar Ultimate Ozone U3000 Kit. AquaStar Ultimate Ozone U3000 Kit 6 stron. Ozone generation system
Drukuj stronęSECTION 1. Overview
Description
The Ultimate Ozone™ system is like no other ozone
injection system on the market. Our easy to install
design delivers ozone through our unique ozone
compatible FlowStar® skimmer.
Unlike other ozone systems, which rely on return
side venturi type injection systems, the Ultimate
Ozone™ system injects ozone through a diffuser stone
located in the skimmer. The ozonated water is drawn
through the skimmer by the pump. As it moves to-
wards the filtration system it oxidizes contaminates,
often changing the structure of organic materials,
which makes it easier for the contaminants to be
removed from the water by the filtration system.
Ozone systems that rely on return side injection
systems return restructured contaminates back into
the pool which can permanently increase
operating costs and may be ineffective with low
settings on variable speed pumps. Our suction side
self-injection system is the solution.
Crystal clear water is now easy to deliver with the
Ultimate Ozone™ system.
Specifications
Power Requirements:
U1000 110/120 volts, .28 amps
U3000 Kit Contents
Includes:
U1000 - Corona Discharge Pump, 1 unit
OZG4017 - Ozone Diffuser Stone, 1 unit
OZG4016 - Ozone Compatible 1/4'' Tubing, 100 ft
Limited Warranty:
Aquastar Pool Products Inc. offers a one-year limited
warranty on the Ultimate Ozone™. See warranty sec-
tion for details and limitations.
Ultimate Ozone™ Installation and User's Guide
Figure 1.2 Front and Side View
SECTION 2. Installation
Location
Ultimate Ozone™ units are designed for wall
mounting. Mount the unit in a clean, protected area,
either indoors or outdoors (preferably out of direct
sunlight). Locate generator out of reach of sprinklers or
drainage spouts. Allow sufficient access for maintenance,
tubing, and electrical wires. Install the Ultimate Ozone™
at least (not less than) one foot above the overflow water
level of the pool or spa where the ozone skimmer is
located.
Wall Mounting
1. Locate the four mounting holes on the top and
bottom of the back panel, two large holes near the top
on the left and right corners and two smaller holes
located respectively on the bottom. Refer to Figure 1.2
for clarification.
2. Install screws through the mounting holes. Secure the
two bottom screws last. Mounting hardware head must
not be smaller than 0.25 inches (6.3 mm) in diameter
and the threads of the hardware must be smaller than
0.25 inches (6.3 mm) in diameter.
.
2
Rev: 030717