Panasonic AG-CX10 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Panasonic AG-CX10. Panasonic AG-CX10 21 pages.

Panasonic AG-CX10 Manuel
Setting up a RCPv2 controller using the default configuration "Panasonic AG-CX350"
Please notice the below instructions are are for the Panasonic AU-EVA1 manual but the principles are the
same. Use the Panasonic AG-CX350 configuration instead.
Please follow these instructions if you have a RCPv2 and want to use it with the Panasonic AU-
EVA1camera.
If you RCPv2 have been shipped preconfigured with the "Panasonic AU-EVA1" configuration please go to
section "Confirm Connection"
If you have a RCPv2 and want to use the default configuration "Panasonic AU-EVA1" please follow these
steps
-
Download and install the Firmware Updater Application (https://www.skaarhoj.com/support/firmware-
updater/)
-
Connect the RCPv2 with the USB programming cable (if you are on Windows and have multiple com
ports available please see the section "Port selection on Windows" in the Installation and Operation
Manual (https://www.skaarhoj.com/support/manuals/)
-
Press "Online Configuration" in the Firmware Application
SKAARHOJ DEVICE CORES
4