Panasonic AG-CX10 매뉴얼 - 페이지 4

{카테고리_이름} Panasonic AG-CX10에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-CX10 21 페이지.

Setting up a RCPv2 controller using the default conﬁguration "Panasonic AG-CX350"

Please notice the below instructions are are for the Panasonic AU-EVA1 manual but the principles are the

same. Use the Panasonic AG-CX350 conﬁguration instead.

Please follow these instructions if you have a RCPv2 and want to use it with the Panasonic AU-

EVA1camera.

If you RCPv2 have been shipped preconﬁgured with the "Panasonic AU-EVA1" conﬁguration please go to

section "Conﬁrm Connection"

If you have a RCPv2 and want to use the default conﬁguration "Panasonic AU-EVA1" please follow these

steps

Download and install the Firmware Updater Application (https://www.skaarhoj.com/support/ﬁrmware-

updater/)

Connect the RCPv2 with the USB programming cable (if you are on Windows and have multiple com

ports available please see the section "Port selection on Windows" in the Installation and Operation

Manual (https://www.skaarhoj.com/support/manuals/)

Press "Online Conﬁguration" in the Firmware Application

SKAARHOJ DEVICE CORES